• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Rumrunner's latest activity

  • Rumrunner
    Rumrunner reacted to WWheeler's post in the thread Valve Covers with
    Like
    .
    You might try these: https://realgaskets.com/product/valve-cover-gaskets-31/...
  • Rumrunner
    Rumrunner replied to the thread Valve Covers.
    I used the silicone ones. they were slightly over sized on the passenger side and it took three times to get them to line up. I would...
  • Rumrunner
    Rumrunner reacted to Outsider's post in the thread Valve Covers with
    Like
    .
    If the VC bolt holes are pulled down and recessed, and you put a straight edge like from a combination square, and find your covers need...
  • Rumrunner
    Rumrunner reacted to Russ69Runner's post in the thread Valve Covers with
    Like
    .
    When putting my intake gasket on did not put sealer on my bolts. Had leaks from day one. This time I did put liquid Teflon pipe dope on...
  • Rumrunner
    Rumrunner replied to the thread Electric fuel pump.
    Mr. 4 speed, You are correct. Rebuilt the carb, (OK, took it to Dave, Monkeys in Manteca,) fuel rod was bent causing fuel to over flow...
  • Rumrunner
    Rumrunner replied to the thread Valve Covers.
    I looked and read over the two gaskets you sent attachments of and others. I decided on the Silicone w/fiberglass because the Moroso...
  • Rumrunner
    Rumrunner replied to the thread Valve Covers.
    Russ, Thanks for getting back to me. It appears to be leaking behind the #8 cylinder just about the corner of the of the cover this...
  • Rumrunner
    Rumrunner posted the thread Valve Covers in Engine & Related.
    I've found another leak from my "original "valve covers. Tired of trying to get these to seal. Sorry for the long link, interested in...
  • Rumrunner
    Rumrunner reacted to mr4speed's post in the thread Electric fuel pump with
    Like
    .
    No you got other problems start with carb first .Electric pump is not the answer!
  • Rumrunner
    Rumrunner reacted to Russ69Runner's post in the thread Electric fuel pump with
    Like
    .
    Have a check valve in my fuel line just before the carb. Running a Holley carb. I do give one pump on the gas pedal before cranking the...
  • Rumrunner
    Rumrunner reacted to V.R.D's post in the thread Electric fuel pump with
    Like
    .
    if you had a carter fuel pump you could rebuild it with this...
  • Rumrunner
    Rumrunner reacted to 69hemibeep's post in the thread Electric fuel pump with
    Like
    .
    The fuel evaporates much faster from the Carter Eddy style carbs. You could put a rotary style electric pump in to fill the carb then...
  • Rumrunner
    Rumrunner replied to the thread Electric fuel pump.
    Thanks VRD. Keep it simple!
  • Rumrunner
    Rumrunner reacted to V.R.D's post in the thread Electric fuel pump with
    Like
    .
    keep a small bottle with a flexible hose and fill the carb fuel bowl's
  • Rumrunner
    Rumrunner reacted to V.R.D's post in the thread Electric fuel pump with
    Like
    .
    also what fuel pump is on the engine there should be a built in check valve to hold fuel in the line for a quicker start after a time of...
Show older items
Back
Top