• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Adding Spacer to clutch fan

TOMRR

Well-Known Member
Joined
Dec 29, 2013
Messages
596
Reaction score
246
Location
Mass
I need to at a small spacer to move my fan into the shroud . The current bolts are to short and it does not look like you could get longer ones in the space the is provided between the pulley and the clutch fan. I can seem to get photo bucket to work or I would post a pic.
Any suggestion ?? I have a thin spacer that will be perfect

Thanks Tom C.
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,141
Reaction score
2,343
Location
AZ Desert,
How far into the shroud is the fan? Ideally you only want the first 1/3 of the fan in there
 

TOMRR

Well-Known Member
Joined
Dec 29, 2013
Messages
596
Reaction score
246
Location
Mass
How far into the shroud is the fan? Ideally you only want the first 1/3 of the fan in there
It rides just at the outer edge and I have never had a over heat problem . I have a hp440 with a 26 inch Radiator. May be not necessary ???
 
Back
Top