Bobby Cunningham
Member
- Joined
- May 27, 2017
- Messages
- 17
- Reaction score
- 0
does any one make the boot for the air grabber power brakes booster for a hemi
Air grabber
- Thread starter Bobby Cunningham
- Start date
Bobby Cunningham
Member
- Joined
- May 27, 2017
- Messages
- 17
- Reaction score
- 0
On the cut out on the bottom of air grabber assembly for brake booster to clear
69hemibeep
Sponge Bob Square Wheels
Like this one. They came on all of the Hemi's manual and power and I don't know why. As far as a source? As luck would have it mine was in good shape
Bobby Cunningham
Member
- Joined
- May 27, 2017
- Messages
- 17
- Reaction score
- 0
Could I get some measurements and pictures of the cut out
droptop
Well-Known Member
Someone reproduced this item several years ago. There may still be some out there. Try BE&A or Layson's.
Bobby Cunningham
Member
- Joined
- May 27, 2017
- Messages
- 17
- Reaction score
- 0
B/E and A has them listed are they a frame around it or just the boot and thanks for the information
69hemibeep
Sponge Bob Square Wheels
Its one piece and riveted into the air grabber
Bobby Cunningham
Member
- Joined
- May 27, 2017
- Messages
- 17
- Reaction score
- 0
Having no luck finding this pcs any ideas
69hemibeep
Sponge Bob Square Wheels
Try MMC Detroit they might know
ricks_RR
Well-Known Member
goggle air grabbers restoration ( don hall ) give him a call he did my air grabber for my road runner he may know what you need
Bobby Cunningham
Member
- Joined
- May 27, 2017
- Messages
- 17
- Reaction score
- 0
Ok
The Hemi brake master cylinder (and vacuum booster) is actually set higher and I think a little to the left (driver's side) away from the BIG HEMI HEADS. I have a couple of photos of power brake booster and master cylinders on 383/440 cars that shows them mounted lower and more centered. Wonder if the brake rod is at an angle under the dash from the brake pedal??????????
