Russ69Runner
Well-Known Member
Has any one put their badges on with a two sided tape instead of using the speed nuts and drilling holes. If so do you remember what you used. Don't want to drill holes in new metal.
Emblem tape
- Thread starter Russ69Runner
- Start date
droptop
Well-Known Member
3M double sided tape.
Russ69Runner
Well-Known Member
Hello Droptop thank you for the info. Did you use the foam double sided tape. A friend of mine is redoing a cutlass and got some 3M tape but it was clear and not very thick. Also not to wide. I told him he got the wrong tape. Well going to order some today. Have a good one.
Russ69Runner
Well-Known Member
Yes dmartin. Thank you also just did not want to drill holes if I could keep from it. Thanks again.
droptop
Well-Known Member
Yes, foam double sided tape. I used it to install the pot metal rallye moldings on my Challenger. Been on there almost 2 years and no issues.
Russ69Runner
Well-Known Member
That sounds grate. You all know what drilled holes in fresh paint and painted metal will do. Appreciate all the help. Russ. 
Are we done yet?
Are we done yet?
Ranger
Well-Known Member
When the Road Runner script on my deck lid was loose as well as the Pentastar emblem on the RF fender, I used the 3M foam backed tape. Worked like a charm AND sealed the holes.