• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Clutch and brake pedal

Russ69Runner

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,705
Reaction score
3,244
Location
Lake Wales Fl.
On the upper linkage looking for the plastic bushing's and the felt washer's where the bushing slides through them to hold them in place. The needle bearing's look good. Also their is a plastic washer where the brake spring hooks to a pin. If any one knows where to get these parts. let me know. I looked into classic but no help. I am cleaning all the rust off all the part's and giving it a fresh coat of paint. Yes something besides the body. While waiting for the leaf springs paint to dry am cleaning up other part's. Thanks Russ. :thumbsup2:
 
Russ69Runner

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,705
Reaction score
3,244
Location
Lake Wales Fl.
Thanks TOMRR. I will try them and several other's to day. Think all I need is the plastic bushing's. They are some what worn and one the out side lip is broken. Also the felt washers. Their is only two of each but it is apart and figured to replace what look's bad. Russ.
 
Russ69Runner

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,705
Reaction score
3,244
Location
Lake Wales Fl.
Well as you know in a rush to get them I found them at Herbs part's. Appreciate the help. Year one wanted 11 dollars a piece. Well their on their way. Thank you again. Don't know why I did not find them in my mopar book for classic. Now to get the felt seals for the clutch thinking to put O rings in their should do the same thing. Russ. :thumbsup::thumbsup:
 
Russ69Runner

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,705
Reaction score
3,244
Location
Lake Wales Fl.
dmartin said:
R/T has a lot of OEM stuff or close to it
Click to expand...
Yea I looked their also. These bushings where broken on the ends or just wore off. Like I said got them from herbs parts. Sand blasting all the parts and painting them While also working on my other leaf spring. Going to paint them today. Then clear coat each leaf tomorrow. Seams like every thing take for ever to get done. Russ.
 
Russ69Runner

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,705
Reaction score
3,244
Location
Lake Wales Fl.
Yes wearing Goggles-respirator-and sand blasting hood. Can't stay in that too long. It is a melt down for me. :thumbsup2:
 
You must log in or register to reply here.
Back
Top