• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

K member sand blasted and painted

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,696
Reaction score
3,231
Location
Lake Wales Fl.
What a job sand blasting and painting the K member was a chore. But it is done. Now to put it back under the car. :lol: I look's like a bone pile hanging every where.

IMG_0101 (1).JPG

IMG_0102 (2).JPG

IMG_0103 (2).JPG

IMG_0104 (2).JPG
 

RAINMANYEH

Well-Known Member
Joined
Sep 13, 2015
Messages
1,049
Reaction score
956
Location
Birmingham, AL
All those parts turned out great.... also like the handicap sign with the bazooka/rifle (can’t tell which in that pic). :thumbsup2:
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,696
Reaction score
3,231
Location
Lake Wales Fl.
Did not notice that the main member got dust on it after painting. Had turned on a fan in the shop. It is not stuck to the paint though so it make it look dusty. Lot's of work. Even welded up some of the area's that looked weak and some trashy looking weld's.
 

Big Mo

Well-Known Member
Joined
Dec 14, 2013
Messages
340
Reaction score
332
Location
Pa. USA
Did not notice that the main member got dust on it after painting. Had turned on a fan in the shop. It is not stuck to the paint though so it make it look dusty. Lot's of work. Even welded up some of the area's that looked weak and some trashy looking weld's.
Hi Russ. I also blasted k frame and painted it. I also welded the two halves together where it was spot welded. Also I seen information on a form or site somewhere (brain fade again) how to weld supports in spots to strengthen some spots. On the lower control arms I welded metal over the bottoms with 3 access holes. These can be bought. Also Russ I tried start a conversation with you but maybe I didn't do it correct.
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,696
Reaction score
3,231
Location
Lake Wales Fl.
I bought it where the rest of the paint for the car was bought. It is not cheap 34 dollar's a quart. Probably should have bought a gallon when starting to use it. :thumbsup2:
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,696
Reaction score
3,231
Location
Lake Wales Fl.
Hi Russ. I also blasted k frame and painted it. I also welded the two halves together where it was spot welded. Also I seen information on a form or site somewhere (brain fade again) how to weld supports in spots to strengthen some spots. On the lower control arms I welded metal over the bottoms with 3 access holes. These can be bought. Also Russ I tried start a conversation with you but maybe I didn't do it correct.
Sent you a PM Mo. List was full.
 
Back
Top