Barbotte
Well-Known Member
- Joined
- Dec 18, 2020
- Messages
- 48
- Reaction score
- 28
Cleaned this up just recently and wondering what colour should it be. Don't want it to rust again before installing it this summer.
Colour of a 73 distribution valve
- Thread starter Barbotte
- Start date
Plybeep68
Acceleratii Incredibus
- Joined
- Jul 17, 2017
- Messages
- 371
- Reaction score
- 387
If it were me I'd go with a shade of gray from rustoleum or krylon
69hemibeep
Sponge Bob Square Wheels
Get some cast iron gray paint. Remember DOT 3 will remove it in a hurry
Barbotte
Well-Known Member
- Joined
- Dec 18, 2020
- Messages
- 48
- Reaction score
- 28
Thanks for the replies. Going to order a rebuild kit for it https://www.musclecarresearch.com/kh-kit-1 , so I'm assuming it's a Kelsey-Hayes iron combination proportioning valve.
Barbotte
Well-Known Member
- Joined
- Dec 18, 2020
- Messages
- 48
- Reaction score
- 28
This should be the perfect paint. https://www.eastwood.com/eastwood-brake-gray-aerosol.html
Plybeep68
Acceleratii Incredibus
- Joined
- Jul 17, 2017
- Messages
- 371
- Reaction score
- 387
That should do the trick ! Be interesting to see if it is truly brake fluid resistant