• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Sway bar install?

woodwiz

Well-Known Member
Joined
Dec 10, 2020
Messages
501
Reaction score
374
Location
Tucson,Az.
Thinking about installing a factory sway bar on the 70 Roadrunner. Should I install it with the car off the ground or can it be done without relief of the front suspension?
Thanks!
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,696
Reaction score
3,231
Location
Lake Wales Fl.
Did mine sitting on the ground. But had not loaded the torsion bar's yet. So don't know if that makes a difference or not. Hope it comes with the bracket's on it and the new bushing in them. It was a job to press those into the bracket's. Maybe some of the other guy's will have a better answer. Russ.
 

quikbird

Well-Known Member
Joined
Mar 1, 2014
Messages
3,229
Reaction score
1,020
Location
Sarasota, florida
Can be installed with car on jacks. Is independent of torsion bars etc. ties into lower control arms but is already at set position by end links with essentially no adjustment possible
 
Back
Top