Separate names with a comma.
Hey gang, I bought a GZ-712CRS Radiator Support to Hood Seal from Lawson's Restorations @ Carlisle and finally installed it tonight. 11 holes...
Hey Gang, back in Spring I first dropped the steering column to fix the tachometer and noticed that the studs and bolt that secure it through...
I realized @ Carlisle this year why my fuel filler tube flops about from side to side - it is missing the bracket to secure it. Now it is leaking...
1. Do I need to put anything on the paper gasket? 2. Should the 2 bolts that secure the fuel pump have washers and/or lock washers? Thanks!
Hey Gang, my rear window exploded (on another post) and I need to replace it - original was clear but I would like to replace with tinted. Was...
My '71 rr 383 fuel pump suddenly started leaking ~ 2 weeks ago on a cold start. I turned off the car and inspected it, hoses are fine. Turned car...
Looking for good quality online stores for Mopar parts. I need some engine parts - distributor cap, rotor, points, condenser, and fuel pump for...
Last Sat on a beautiful New England day while stopped at a traffic light in downtown Holden, MA I heard a bang then a crack - my rear window...
After removing my driver side front bucket seat to remove the instrument cluster I noticed that the outboard seat holes go through a frame...
I have an antenna mounted on the RF fender but the coax wire is coiled up inside the fender and I checked with a mirror but do not see any hole to...
I dropped the steering column to remove the instrument cluster at which time found that only the 2 nuts on the studs were securing the column (3rd...
I recently bought a '71 rr (383 original points ignition) with a broken tachometer (stuck on 2000) and sent the entire cluster to Gary the Tachman...
Please help - I recently pulled the instrument cluster out of my '71 road runner (tac broken) and found that I was missing 5 out of 6 sheet metal...
Please help - in the process of replacing leaky valve cover gaskets I discovered that 8 of 12 bolts appear to be correct OEM w/ captive washer but...
