Search results

WTB Complete and functioning window regulator including the big mounting nuts for the drivers side rear window for my 69 RR hardtop (duh). OK if it needs rollers as I'm buying a roller kit anyways. My drivers side rear regulator is missing pieces (basket case rebuilds are a BLAST!). Let me know...

Finally starting to get some little stuff put on the roadrunner! First question: Did I install these adjuster nuts from the wrong side? It made sense to pull them through from the back, but now that I've seen some fuzzy pictures, I think they might push in from the front. Second: Locations...

Well, as you all know, 3 months means 6 and 6 months means 10 when it comes to body guys. But the wait is paying off! The final sheet metal is getting color this week! Should be coming home October 1st! It has to, a 69 Super Bee is being delivered to his shop that day and he only has room for...

Hi all, getting close to paint on my RM23, and my body guy needs to know where to tape off my doors where the exterior is T5, and the interior is T7. My guess was at the door seal/weather strip holes around the perimeter of the door, but he thinks it might just be a tape line around the interior...

What is the small hole directly above the hole for the mirror remote? Does it belong there? Or should it be welded up? I do not have a mirror yet. Thanks!

Looking for all four side marker housings with the mounting brackets and nuts (no broken studs). Don't need reflectors but if you have them and they are in good shape that's a bonus! I can get these repro, but don't feel like paying Year One prices if someone has a set laying around or can make...

Well, the RR is in a real body shop, getting some quality attention by a fellow MoPar guy that gives a damn. Up on the rotisserie, getting full 1/4's, new fenders, new front floor, subframe connectors, one front wheel house, both rear wheel houses (inner and outers), the list of AMD sheet metal...

Hi all, the 69 RM23 project is moving right along. All the AMD sheet metal is in or on it's way. Getting close to painting interior parts and I've come across a dilemma. I'm not sure what the level of "gloss" should be on some interior trim parts. My car was originally, and will be again, T5...

Hi guys, I haven't been on in a while, mainly because there has been no progress. However, the body is now in the shop, AMD sheet metal is in (both full quarters, both front fenders, inner/outer real wheel houses, trunk floor extensions, and left inner fender well), and the car is going up on...

Most of the 69 Roadrunners that I have seen have headrests, even on the bench seats. I picked up the rest of my parts today including the front seat. Interior in this car is the Saddle/Bronze "Decor" interior that comes standard on hard tops...but no headrests. Based on the condition of the...

Is there an aluminum factory bellhousing available for a big block/A-833 combination? In my quest to shave weight off my 69 RR I realized there is probably 25 or 30# to be saved by not putting the iron one back in the car. If an aluminum one isn't available I may consider a steel aftermarket...

Hi guys, going through dash parts as this will be the first big job to tackle on the car once it's painted.I've found a couple places that make repro dash pads (top piece). But does anyone make repro lower dash pads and/or glove box doors? Mine are "useable" but have some cracks and I'd like to...

VICTORY!!! After several ideas and attempts, i finally got the polygraphite sway bar bushings/brackets on the sway bar!

Hi guys, is there an online resource for all the paint splotches, grease pencil marks, and stamps on the underside of the car? Torsion bars, 8-3/4 center section gear ratio markings, 'bolts torquesd" markings, etc. Specifically for a 69 RR. I remember when my dad restored his 64 Polara 500...

I'm bored with waiting for other people to do stuff on my car, so I'm posting a picture of my original shifter ball. It won't fit (different thread pitch) the Hurst shifter I have so I'll put a classic white ball on the car. This will sit in my curio cabinet with other "trophies" of motorsports.

Hi all, While I sit here with nothing to do as the body guy takes his sweet time, I'm seriously considering fiberglass bumpers for my 69 Roadrunner. Car color will be T5 Bronze Fire with a flat black Six Pack hood and I'm having a hard time finding pictures of 68/69 Roadrunners with body color...

Hi all, It's been a while since I posted and didn't want you to think I forgot about you (LOL). My 69 RR HT project seems to keep getting pushed back. The body guy that is welding up floors, media blasting, priming, and putting color on the bottom and jams has pushed it out to October now...

Hi All, I got a front end rebuild kit from PST and have run into my first snag. The item pictured is the idler arm and center link. Fist question: Does the foam washer shown stay there? Or is this just packing material to keep grease in/dust out while storing transporting? Second...

I'm a ways away from needing "The Big Motor" for my Roadrunner project, but I've been knocking this question around. The original 383 has been in pieces for a couple decades and will need a boatload of machining, (bore, crank cut, deck heads and block, line bore, etc.) so my immediate plan is to...

Some of the parts that I have an immediate need for are the 4 big bolts that hold the K-Member to the front frame rails on my 69 Roadrunner (can't seem to find them in the pile of parts that are to be my "complete" Roadrunner in boxes). Are these available aftermarket? Or does someone have a set...