• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Question for TTi exhaust users

A31PKG

Well-Known Member
Joined
Apr 28, 2010
Messages
880
Reaction score
6
Location
Mid-Atlantic
Installed TTi's 2.5" H-pipe system today... I found the driver's side muffler hanger does not line up with the body bracket properly. It's off (inboard) by about 3-4 inches.... The passenger side fits perfectly... I plan on calling them, but in the meantime I was wondering if if anyone else has experienced this? I followed their directions to the letter.... The body bracket is original to the car and has never been removed... I could re-fabricate the upper portion of their muffler hanger to mate up with the body bracket, but considering the cost of this kit, I would hope that everything would just bolt up. I'm attaching a pic with my guess as to what it should look like...
 

generaljmwlee

Well-Known Member
Joined
Feb 15, 2010
Messages
1,068
Reaction score
2
Location
NEPA
mine was off also I jus adjusted the 2 sides to hang where I needed it
 

dutchrunner

Well-Known Member
Joined
Mar 21, 2010
Messages
458
Reaction score
1
Location
The Netherlands
Just finished installing the 3" without any problems.
3-4" sound to much for comfort!

I hope you put it on the tailpipe hangerbracket and not on brakeline hanger?
 
Back
Top