• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

'71 road runner rear window spontaneously shattered

road robert

Active Member
Joined
May 2, 2020
Messages
43
Reaction score
31
Location
Holden, MA
Last Sat on a beautiful New England day while stopped at a traffic light in downtown Holden, MA I heard a bang then a crack - my rear window exploded! Nothing could have fallen from above (no trees, etc.) either a passing car (muscle car hater threw something?) or just a freak thing. Has this happened to anyone else?

road runner rear window fractured.jpg

road runner rear window imploded.jpg
 

road robert

Active Member
Joined
May 2, 2020
Messages
43
Reaction score
31
Location
Holden, MA
Maybe the genius Wile E. Coyote did this? I might recall seeing seen some Acme explosives but was in shock at the time... Biggest concerns are not the glass, but the chrome trim AND the paint job!

road runner rear window fractured side view.jpg
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,202
Reaction score
2,437
Location
AZ Desert,
The trim should come off without injuring the paint, just have an extra pair of hands to help hold it.
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,787
Reaction score
3,331
Location
Lake Wales Fl.
I know that sick feeling for sure. That really should not happen. Is it the original glass. Here is mine after two hours of being put in to the car. IMG_0106.JPG
 

quikbird

Well-Known Member
Joined
Mar 1, 2014
Messages
3,270
Reaction score
1,079
Location
Sarasota, florida
Russ that break is right under the connector on the trim. Any possibility something under that pressed on the edge of the glass. The weak spot is the edge, not so much the panel
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,787
Reaction score
3,331
Location
Lake Wales Fl.
Russ that break is right under the connector on the trim. Any possibility something under that pressed on the edge of the glass. The weak spot is the edge, not so much the panel
I give up quikbird. Going to have one made and that will solve the problem. Thanks for the info. Took the used one I just bought and used it to mark where to shrink the one their going to make for me. This should solve all the problems and let me get on with building the car. :beep:
 
Back
Top