• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Dash Rebuild

Russ69Runner

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,705
Reaction score
3,244
Location
Lake Wales Fl.
Say Big Mo. Did the blank where the tach goes hard to get out. Did you have to pull the front plastic to get to it or can it come out the back. It looks grate too. You could go into business doing them. LOL. Have a good one. Russ.
 
B

Big Mo

Well-Known Member
Joined
Dec 14, 2013
Messages
340
Reaction score
332
Location
Pa. USA
Russ69Runner said:
Say Big Mo. Did the blank where the tach goes hard to get out. Did you have to pull the front plastic to get to it or can it come out the back. It looks grate too. You could go into business doing them. LOL. Have a good one. Russ.
Click to expand...
Russ it should come out the back. I have the dash mounted on a stand that Big John suggested to do a few years back. It was easy to get to the back.
 
Russ69Runner

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,705
Reaction score
3,244
Location
Lake Wales Fl.
Well I pulled the cluster out while the dash was in the car. Assume that the reverse will work also. Except I do have an AC box in the car now but should not be in the way. Will see.
 
B

Big Mo

Well-Known Member
Joined
Dec 14, 2013
Messages
340
Reaction score
332
Location
Pa. USA
Russ69Runner said:
Well I pulled the cluster out while the dash was in the car. Assume that the reverse will work also. Except I do have an AC box in the car now but should not be in the way. Will see.
Click to expand...
Good luck. I am getting ready to put my dash in Monday. I put the grill assembly in today but will take it out so it does not get damaged when I put the engine in. I cannot get another one. I need the dash in then I can work on wiring.
 
69hemibeep

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,144
Reaction score
2,354
Location
AZ Desert,
After the dash is wired. Put the dash in on the two lower bolts let it swing down on a support of some kind and wire away. Then swing it up into place and put the top bolts in.
 
B

Big Mo

Well-Known Member
Joined
Dec 14, 2013
Messages
340
Reaction score
332
Location
Pa. USA
69hemibeep said:
After the dash is wired. Put the dash in on the two lower bolts let it swing down on a support of some kind and wire away. Then swing it up into place and put the top bolts in.
Click to expand...
Hi 69hemibeep Big Mo here. After you wire the dash before swinging up into place did you power up the dash what you can to check any of the wire circuits. I have checked the harnesses as I put them in and they all work. I now know that part of the circuit is ok.
 
69hemibeep

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,144
Reaction score
2,354
Location
AZ Desert,
Big Mo said:
Hi 69hemibeep Big Mo here. After you wire the dash before swinging up into place did you power up the dash what you can to check any of the wire circuits. I have checked the harnesses as I put them in and they all work. I now know that part of the circuit is ok.
Click to expand...
I did after the all the lights and accessories were in and the column loosely fitted plugged in and before the windshield went in. Worse case I would have to drop the column and dash again but I was able to test everything.
 
You must log in or register to reply here.
Back
Top