• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

front seat belt 69 roadrunner question

dodgey68

Well-Known Member
Joined
Jul 16, 2019
Messages
94
Reaction score
87
Location
Australia victoria
good afternoon, i have a 69 runner and for vic rego i need to fit lap/sash belts, (3 point) before i remove side of headlining, i am asking when did b-bodys have the holes with bolts fitted into the roof turret for the front seat belt, thank you
 

ACME A12

Plaid Sport Coat Wearing Moderator
Staff member
Joined
Nov 4, 2008
Messages
13,675
Reaction score
828
Location
New Port Richey, FL
Your '69 would have left the factory with shoulder harnesses. The bolt holes are there.
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,144
Reaction score
2,354
Location
AZ Desert,
Are you going to pull the head liner to find the holes? If so with a little help of a picture you can feel them and punch a hole.
 

quikbird

Well-Known Member
Joined
Mar 1, 2014
Messages
3,233
Reaction score
1,028
Location
Sarasota, florida
Roadrunner belts are separate. Has a lap belt and separate shoulder belt. That is why there are so many buckle ends on the seat. The attachment for the shoulder belt is above the quarter window. I will guarantee that Bob has a great picture of this spot and that compared to one from Dave will actually be in focus. :lol:
 

dodgey68

Well-Known Member
Joined
Jul 16, 2019
Messages
94
Reaction score
87
Location
Australia victoria
ok i have the belt holes with threads in the roof, :thumbsup: i have a 68 charger and it does not
that was why i was querying ,, thank you
 

Rumrunner

Well-Known Member
Joined
Mar 27, 2019
Messages
146
Reaction score
133
Location
Manteca CA
I just added 3-point seat belts for the front seats in my 68. I used an existing hole above the post, first welded a nut to a 2x3 or so 16 gauge plate then welded and screwed the plate with the bolt on he inside of the hole to the 18 gauge frame. If you don't have the hole there already you'll have to drill one.
 

Rumrunner

Well-Known Member
Joined
Mar 27, 2019
Messages
146
Reaction score
133
Location
Manteca CA
First time trying to add pics,
didn't go real good but here are some.
My car came with just a hole w/o the nut.
1-68

upload_2021-1-18_11-5-2.jpegupload_2021-1-18_11-5-47.jpeg upload_2021-1-18_11-4-26.jpeg upload_2021-1-18_11-5-2.jpeg upload_2021-1-18_11-5-47.jpeg upload_2021-1-18_11-4-26.jpeg upload_2021-1-18_11-5-2.jpeg upload_2021-1-18_11-5-47.jpeg upload_2021-1-18_11-4-26.jpeg
 
Back
Top