Need help with quarter vertical seal and chrome fitting back on the quarter window

Bearse

Bearse

Member
Joined
Oct 10, 2025
Messages
9
Reaction score
3
Location
Orleans, MA
I tried changing the quarter vertical seal (between the side windows) and I put the rubber seal on the vertical chrome piece and I can’t get them both back on the quarter window enough for the door to shut onto the rubber (it hits the chrome instead.
Photo 1 - Old seal on car
Photo 2 - What it look like with the seal and chrome fitting off.
3. Vertical rubber and chrome piece
4. How the door closes now because I can’t get the rubber and chrome piece to fit fully onto the back quarter window.

Help please! (Sorry photos are sideways - they are not that way on my phone).

IMG_705C453E-31FE-4FEE-8046-8C8DD00A3CBC.jpeg

IMG_3695.jpeg

IMG_3696.jpeg

IMG_2365.jpeg
 
Adjust window I removed all 4 and put power windows in for the first time it is tricky but you will get it. Did you remove both windows or just 1? I did one (front) at a time and made it fit right then did back.
 
Generally speaking, the quarter glass regulator has some forward and backward movement adjustment via slotted bolt holes in the body.
You use that and the up stops to position the quarter to door glass contact.
It's a balancing act. Sometime near enough is good enough with replacement items.
 
You must log in or register to reply here.
Back
Top