Gen2 hemi , TTI and Borgeson tips wanted

[dutchrunner]

Good day ,

Am working on placing Borgeson steering box in my 68RR.
Has Gen2 (572 with StageV (lowport)) and have unknown maker headers.
Stock K-frame and steering linkage.
This creates huge issue with box.
Will TTI solve this issue ?

Anyone on the forum has this done or knows someone that did this?
TTI's are beeing shipped to Netherlands half January , so have some time to get more info.

Called TTI and they asked me to let them know if it fits?!

Thanks for any advice/tips/leeds.

 

[dutchrunner]

:bump:

 

[69hemibeep]

Not me :bump:

 

[zupanj]

I used tti and had no trouble. Used primary 2 1/4" tubes and it fit perfectly. I have a hemi on Schumacher mounts. However I have Indy heads so the port might be different. Not sure about your question on the steering box.

 

[george68hemirr]

i would wait and see what TTI has to say.....you may have to re-work your headers......hope not.......i would compare boxes and locations and see what you come up with.....Borgeson steering box ....i would also call or send a email to them to see if there is much of a difference too.....good luck

 

[dutchrunner]

Thanks for replys.
TTI didn't know and steering box is already bought.
Getting TTI's in next month and hope this will be less hitting to get them fit as the present make headres.
Then I just have to wait and see.

Well thanks anyway for help.

 

[quikbird]

anything fits with a torch and a big enough hammer!! :lmao: