Latest activity

  • V.R.D
    V.R.D reacted to RP27G8's post in the thread Parts Dealer with
    Like
    Like
    .
    Thanks! I did post there as well. Have a great day!
  • R
    RP27G8 replied to the thread Parts Dealer.
    Thanks! I did post there as well. Have a great day!
  • V.R.D
    V.R.D replied to the thread Parts Dealer.
    On for b- bodies only a lot of people recommend that place I think I've only bought one or two things but I've not had a bad experience...
  • R
    RP27G8 posted the thread Parts Dealer in General Discussion.
    Has anyone done business with Mopar Parts Sales out of Warren, MI? I've been working with a guy named Jason from there and things seem a...
  • mytfyn69
    Not a bad price for a running drive able car.
  • mytfyn69
    Has not been tubbed, VERY close clearance on those rear M/T’s….
  • Terry Hauck
    Terry Hauck replied to the thread Temp too high??.
    I changed to an 18-inch mechanical flex fan, Milodon high-flow water pump, 160 high-flow thermostat, and a stock-style shroud. I had to...
    • Fan.jpg
    • Fan1.jpg
  • Terry Hauck
    Terry Hauck replied to the thread 440 Source Distributor.
    Make sure you have a good #27 Interstate Battery with 1000 CA. I think the cheap remanufactured battery I had couldn't provide enough...
  • Terry Hauck
    Terry Hauck replied to the thread Cranks but only fires in run.
    UPDATE!!! I installed a new #27 Interstate Battery. 1000 CA. Fires fine now in start. I think the cheap remanufactured battery I had...
  • S
    snapshot reacted to 69hemibeep's post in the thread 440 overheating with
    Thanks!
    Thanks!
    .
    How was the block cleaned when rebuilt? Just a guess but I've seen new builds where casting sand and other debris come loose and...
  • V.R.D
    V.R.D replied to the thread 440 overheating.
    Something doesn't add up with this post the man is dismissive on the questions were asking him cuz I've asked him to put a manual temp...
  • 69hemibeep
    69hemibeep replied to the thread 440 overheating.
    How was the block cleaned when rebuilt? Just a guess but I've seen new builds where casting sand and other debris come loose and...
  • S
    snapshot replied to the thread 440 overheating.
    I don’t know if rust should be an issue as everything has been replaced
  • S
    snapshot replied to the thread 440 overheating.
    I did check that and seems to be correct
  • S
    snapshot replied to the thread 440 overheating.
    If if fluid is running too quickly how can that be checked, thanks
Back
Top