• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Body plug locations / Door hardware and door glass order..

roadrunninMark

Well-Known Member
Joined
Jan 14, 2011
Messages
190
Reaction score
155
Location
GA
I have a bag of body plugs and not sure where they all go. Since my car's body is somewhat modified, especially the trunk and rear wheel wells, I would like to put all the plugs in I can. Does anyone have a list of where all the body plugs go?

Before I attempt the door hardware and door glass... which order should be done first?

Thanks..
 

Basketcase

Keeper of the Green
Joined
Sep 10, 2008
Messages
14,415
Reaction score
299
you might check the factory service manuals in the Tech Section. You didn't say what year your car is...the FSM downloaded is for '69.
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,696
Reaction score
3,231
Location
Lake Wales Fl.
You can start by just sizing the hole to the plug. Also to Reference material it show's quite a bit.
roadrunninMark glad you liked the post. Every one tells me to buy two set's. Their are a lot of holes to plug. Post some pic's and let see what your up to. Russ.
 

ACME A12

Plaid Sport Coat Wearing Moderator
Staff member
Joined
Nov 4, 2008
Messages
13,671
Reaction score
824
Location
New Port Richey, FL
Nice. Looks like she is going to have big feet in the rear. Cool. :thumbsup:

Whereabouts in GA are you?
 

Basketcase

Keeper of the Green
Joined
Sep 10, 2008
Messages
14,415
Reaction score
299
there's another guy that shows up once in a blue moon that is rumored to be an internet mass murder.........:poke:
 

roadrunninMark

Well-Known Member
Joined
Jan 14, 2011
Messages
190
Reaction score
155
Location
GA
50002032_10213190806184525_1927993841168678912_n.jpg 100_4972.JPG 100_4742.JPG Hi Acme A12, yes, she's got big feet lol. Size 33 x 21 x 15 to be exact. Funny thing is when those tires were sitting by themselves, they looked like monsters. When they are tucked up underneath, they don't look so big. I am in Fayetteville, south of Atlanta.

Thanks Russ, it has been a long project since I too it off the road back in the 90's. I hope it will be less than 2 years from now to finish. I am moving at a slow pace but making some progress.
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,696
Reaction score
3,231
Location
Lake Wales Fl.
Just to ask when you tubed it did it inter fear with the back seat. Or do you have a back seat. Looks good you did a grate job.
 

roadrunninMark

Well-Known Member
Joined
Jan 14, 2011
Messages
190
Reaction score
155
Location
GA
Stroked 440. about 528 cubes...Not sure what the HP level will be, estimating over 700.
engine1.jpg
 

Russ69Runner

Well-Known Member
Joined
Aug 4, 2016
Messages
7,696
Reaction score
3,231
Location
Lake Wales Fl.
Good thing you put all the cage and support's in. I am impressed. Don't need any stinking back seat. Keep a blanket and throw her on the hood. :thumbsup2:
 
Back
Top