• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

help removing door panel

stevo

Well-Known Member
Joined
Oct 6, 2015
Messages
63
Reaction score
1
Location
Scarborough
OK the stupidest thing happened to me on the weekend....
I go to open the driver side door, my thumb slips off the button to open the door and the dang door button falls in the door.
So any tips on removing the door panel on a 69 RR so i can fix the door handle....

thanks again!
 

djais1801

Well-Known Member
Joined
May 7, 2015
Messages
588
Reaction score
32
Location
point pleasant
take the window crank off w allen key, take the arm rests off, and carefully pop the panel off.
 

quikbird

Well-Known Member
Joined
Mar 1, 2014
Messages
3,233
Reaction score
1,028
Location
Sarasota, florida
remember that the tar paper is in there for a reason. can be replaced with plastic sheeting if paper is beyond help. remove very gently and can then find button
 

69hemibeep

Sponge Bob Square Wheels
Joined
Sep 10, 2008
Messages
22,144
Reaction score
2,354
Location
AZ Desert,
It is held on with spring clips. I use a ridged putty knife and a rag between it and the paint.
 

stevo

Well-Known Member
Joined
Oct 6, 2015
Messages
63
Reaction score
1
Location
Scarborough
thanks so much for the tips!
now i just have to figure out how to fix the door handle lol
 
Back
Top