horn pad install

[generaljmwlee]

can anyone tell me or show a pic on how the horn pad connects to the steering wheel?

 

[roadrunnerh]

I can only say that on my 68 (69 + 70 same) sport steering wheel, I gently twist off the padded center. It has three tabs on it that attach to the metal ring it covers. The ring is then removed by removing the screws that attack it to the wheel. Make sense?
I can take a pic, but it will have to wait until tomorrow.

 

[generaljmwlee]

my 68 was the same but this horn pad goes over the 3 spokes in the wheel and gets a center cap that presses in to finish it. wont be able to spin it

 

[69hemibeep]

If your talking the pad with the roadrunner in the middle you have to pop the roadrunner out with a small screw driver to get at the bolt. And start at the left side because there is a tab on the right.

 

[V269]

If your talking the pad with the roadrunner in the middle you have to pop the roadrunner out with a small screw driver to get at the bolt. And start at the left side because there is a tab on the right.

Yep, what Bob said.
P.S. Bob I had to go shopping yesterday too. :facepalm:

 

[69hemibeep]

If your talking the pad with the roadrunner in the middle you have to pop the roadrunner out with a small screw driver to get at the bolt. And start at the left side because there is a tab on the right.

Yep, what Bob said.
P.S. Bob I had to go shopping yesterday too. :facepalm:

I hate wrapping and rappers :jester:

 

[V269]

If your talking the pad with the roadrunner in the middle you have to pop the roadrunner out with a small screw driver to get at the bolt. And start at the left side because there is a tab on the right.

Yep, what Bob said.
P.S. Bob I had to go shopping yesterday too. :facepalm:

I hate wrapping and rappers :jester:

I wrapped my first three and last three gifts this morning. Were done now too. :banana:

 

[generaljmwlee]

i dont have the horn pad on I just dont know if I have all the pcs to install it.my car came with a small aftermarket wheel.

 

[69hemibeep]

i dont have the horn pad on I just dont know if I have all the pcs to install it.my car came with a small aftermarket wheel.

Did you get the pad like mine, I have a sequence of pics as how it goes together or go to the reference section.

 

[generaljmwlee]

was searching last night on the site didnt see any thing ,but Ill have to look again. any Idea what to look under in ther ? I paged through the service manual the pics didnt help . I got every thing they show just dont know what the bolt for the pad goes to

 

[69hemibeep]

was searching last night on the site didnt see any thing ,but Ill have to look again. any Idea what to look under in ther ? I paged through the service manual the pics didnt help . I got every thing they show just dont know what the bolt for the pad goes to

I'm not sure, but is your pad the same as mine?

 

[generaljmwlee]

yes the same

 

[69hemibeep]

Here you go

 

[69hemibeep]

Make sure you get the right horn switch with the three screw holes for the horn ring

 

[generaljmwlee]

mine looks the same other than the second pic