Hose Clamps

TOMRR

TOMRR

Well-Known Member
Joined
Dec 29, 2013
Messages
605
Reaction score
249
Location
Mass
HPIM4621.jpg

I change my hose clamps from the current band type to the wire type. So far so good but don't seem to have the confidence that I had with the band style clamps. Just wondering does any one use a sealant of any kind such as Shellac or some thing else To insure a good seal !!

Thanks Tom C.
 
69hemibeep said:
If the hoses are soft the clamps work fine don't add anything
Click to expand...
The hose is new and soft so should be ok !! I did not use old hose with wire camps because of the impression that the band type clamps made !

Thanks For The Reply Tom C.
 
I'm not sure what orientation the factory put those clamps on, but I would move the top hose clamp. I had that style clamp on one of my cars and "clocked" in that fashion, I opened up the palm of my hand reaching across it.

I got sick of the wire clamps and went back to the worm clamps after a while.....
 
Big John said:
I'm not sure what orientation the factory put those clamps on, but I would move the top hose clamp. I had that style clamp on one of my cars and "clocked" in that fashion, I opened up the palm of my hand reaching across it.

I got sick of the wire clamps and went back to the worm clamps after a while.....
Click to expand...

Accident pron people should not work on cars :yesnod: How is your toe :lol:
 
You must log in or register to reply here.
Back
Top