In need of Fuel and Brake routing diagrams

Collin

Well-Known Member
Joined
Jul 17, 2009
Messages
876
Reaction score
5
Due to some frame repairs the factory Clip holes need to be re-drilled. Can someone please post a routing diagram with hardware for the brake lines (manual drums) and for the 5/16" fuel lines from tank to carb. Any diagram or pictures would help.

Thank you!
 
have you checked the tech section for the factory service manual ('69)?
 
I have pictures Collin the brake lines would be the same and the 3/8 line with return follows the same path as yours to the fuel pump. It was undercoated so it's ugly to look at if that will help.
 
No promises. But this weekend I'll be moving my unmolested 69 and will try and get some pictures underneath it.
I need them for documentation anyway. It will be a little dirty and rusty.
 
Thanks everyone. I searched through some old pics on here. My vent line runs in the trunk. I have several clips in the kit and an"extra" bolt style clip. Just trying to make sure everything is in its proper place
 
I took some pictures this weekend under the car. But I don't know if they are what you need. And uploading is a PITA. I keep having to search for the folder. It doesn't go right back to it to upload more than one picture.
 
Understandable. I just hate having extra hardware and guessing where the holes should be on the frame rail. Thanks for the input, I know uploading pics is a PITA lol. It's 5 degrees out and up to -20 wind chills... The car can wait
 
Back
Top