Max. Rear Tire size?

[440Kilmartin]

Hello my 275.60.15 street tires aint cutting it on my 69rr . i would like to know if anybody have fit a 295 60 15 ....on a 8inche stock wheel, with no "trimming"
thanks for the input

 

[moparchris]

Short answer, no.

 

[440Kilmartin]

ANY IDEA WHAT WILL FIT

 

[sixgunrunner68]

275.60.15

 

[moparchris]

Without any trimming what-so-ever a 275/60 15 on a 15x8 4.5 backspace will work without rubbing.

 

[ACME A12]

Without any trimming what-so-ever a 275/60 15 on a 15x8 4.5 backspace will work without rubbing.

Exact combo that several of us on here run.

 

[roadrunnerh]

275.60.15 not cutting it? PLEASE don't go nutty and run some ghetto style rims!!! :ack:

 

[moparchris]

275.60.15 not cutting it? PLEASE don't go nutty and run some ghetto style rims!!! :ack:

Weld racing runs in house. No Donk on my house.

 

[440Kilmartin]

No Thanks! i like my steel wheels

 

[Roadcuda]

WTF, over?!?!?!? :leave: :ack: uke:

 

[ACME A12]

WTF, over?!?!?!? :leave: :ack: uke:

Chris isn't getting a lot of sleep these days... :basketcase:

:jester:

 

[moparchris]

I have decided that Mopars are too chic for me so I am turning over my collection to DONKS!

 

[Basketcase]

:loco:

 

[roadrunnerh]

what the hell is a "donk"? :crazy:

 

[ACME A12]

what the hell is a "donk"? :crazy:

Look at the picture. That is the epitome of a "Donk". Typically anything outfitted with wheels 20" or larger are referred to as "Donks".

:leave:

 

[A31PKG]

X2

I can't help but wonder how older folks in the 50's viewed the wide whites and baby moons!

 

[moparstuart]

I have decided that Mopars are too chic for me so I am turning over my collection to DONKS!

ok i'll come get the superbird and the bee i'll bring you a couple dorks to replace them

 

[440Kilmartin]

. :loco: i just wanted to know if anyone put a 295 60 15 slick in a stock wheel well

 

[mcmopar]

One of our former members ran that combo but had to trim the wheel well lips to get them to fit without rubbing. It will be very close.

 

[A31PKG]

. :loco: i just wanted to know if anyone put a 295 60 15 slick in a stock wheel well

I think a 295 would look awesome tucked inside a 'Runner wheel well. I would think the rim would have to be 10" wide? I know from observing many over the years however, that 10" is pushing the envelope in a stock wheel well. Maybe with a custom offset or width? Maybe 9"? I think a 295 on an 8" wheel may not provide the look you're after. Do you have access to a used 295 that you could play with?