Need a picture passenger side right rear convertible wheelhouse

[Jack R]

Missed that mine was bent. Today was putting trunk pan in and noted something else bent. There is no repro of the convertible wheelhouse, I had already planned to cut a coupe wheelhouse to fix damage at lower portion.

picture I need is from in trunk - upper portion or top welded section of the pass side wheelhouse.

 

[Russ69Runner]

RonLiv has vert. may be he has some pic's to help ya. May try to PM him. Hope that he has what you are looking for. Go to Ron's photo Garage their is a picture of the trunk while it was in restoration. May be that will help.

 

[RonLiv]

I'll take one today and send. If you send a pic of exactly what you want that would help so I don't take the wrong shot.

 

[Russ69Runner]

I found video's of restoring a convertible runner limited. Their are more on 69 runners hard top also. But they just pan over the build don't always have details good enough to get what you want to know. This is sad but true. Wish you luck on such a rare car. At least Ronliv can get some pic's for you. One runner owner helping another this is grate.

 

[RonLiv]

Digging through some of the restoration pictures I found this one. I'm still going to take some pictures this afternoon.

 

[RonLiv]

Here's what I took. If you need more or a different angle let me know.

 

[Jack R]

Thank you Ron. As I thought a dent in mine that shouldn’t be there. I had old light collision damage at the bottom but never noticed this

 

[Jack R]

Or this...LOL

 

[Jack R]

Have to make that cross brace. It will be close to what it should be.

 

[Russ69Runner]

Jack R. I had to get a bead roller from eastwood to recrate a few pieces my self on a 69 post car. That is why we are fab guy's also in the end. Even bought a Anvil to hammer out some part's. Lucky enough a friend of mine has a metal brake I used also. Love to see someone else bringing these muscle car's back to life. Good luck with the build. Russ.

 

[Jack R]

The guy in the picture is a sheet metal expert. He is the one doing the work. Body assembly should be done over the next 3-4 weeks. The cut brace was the last of the poor quarter panel repair previously done years ago that needs fixed right.