Rocket
Well-Known Member
- Joined
- Jul 1, 2010
- Messages
- 288
- Reaction score
- 6
I'm wondering if anyone has tried studs on a six pack manifold? If so , what length worked?
Studs on a six pack?
- Thread starter Rocket
- Start date
Big John
Sit back, relax Don't bitch about the cigar smoke
- Joined
- Sep 8, 2008
- Messages
- 5,057
- Reaction score
- 82
I assume you are talking about using them for the carbs.
I used them and they worked out OK. It's nice to do that with any aluminum manifold. I used some that were coarse thread on one end and fine on the other, but on the last manifold (not a 6bbl) I used 1 3/4" long allen set screws, but 1 1/2" should work too.
BTW, the Dodge is six pack, Plymouth is six barrel or 6bbl.
I used them and they worked out OK. It's nice to do that with any aluminum manifold. I used some that were coarse thread on one end and fine on the other, but on the last manifold (not a 6bbl) I used 1 3/4" long allen set screws, but 1 1/2" should work too.
BTW, the Dodge is six pack, Plymouth is six barrel or 6bbl.