• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by mopar jack

  1. mopar jack

    Indy Cyl Head Billet Rear Main Seal Housing

    Mancini has the side seals for their retainer listed for $5.95 https://www.manciniracing.com/maresisepk.html
  2. mopar jack

    Engine compartment 440 1970

    If you have a build sheet, under labels you will find the correct number for the emission and tire pressure decals.
  3. mopar jack

    Air Grabber Air cleaner set up

    My 71 came with 2 build sheets 1 under the carpet behind the front pass seat and 1 behind the rear seat upper portion. This is an early build (8-70) from the L.A. plant.
  4. mopar jack

    Air Grabber Air cleaner set up

    My 71 road runner came with the round pie tin and never looked right so I installed a 69 air cleaner assembly. I really like the decal for that year.
  5. mopar jack

    Air Grabber Air cleaner set up

    this link will get you up to speed on air cleaners. https://nicksgarage.com/aircleaner2.htm
  6. mopar jack

    center console yes or no

    Thanks for the replies. I commuted to work in this car for 6 years back in the nineties with no console and liked the Hurst shifter by it's self. I always thought the 4speed console was an after thought with a big opening and the boot not connecting at the top and also sticking out on the side...
  7. mopar jack

    center console yes or no

    If I go with a console I will put a cup holder in it. There seams to be enough room behind the shifter. I also have a 71 barracuda with a slap stick auto and console and not much room due to the linkage. I like the no console look of the Hurst shifter, bold and all business, but also like how...
  8. mopar jack

    center console yes or no

    Finishing my 71 road runner restoration and can't decide to add a console. The car came with buckets and no console.
  9. mopar jack

    1971 road runner base model tire model & size

    Thanks, just got it out of the body shop after 2 1/2 years. The paint is Glassurit acrylic enamel mixed to match vitamin C . Car was originally K6 and no tachometer
  10. mopar jack

    1971 road runner base model tire model & size

    This is the spare in the trunk when I bought the car in 1994. It appears to have been an original tire on the car.
  11. mopar jack

    1971 road runner base model tire model & size

    My road runner is a 1971 California built 08/1970
  12. mopar jack

    1971 road runner base model tire model & size

    f70x14 with white side wall on mine
  13. mopar jack

    Parking brake

    For the E brake I would slide the cable in the hole and push everything to the firewall. The cable is very rigid to the pedal assembly and will be very close to the right spot. On the air grabber clearance I have modified the air cleaner base (lowered) to get the clearance needed.
  14. mopar jack

    window hardware

    mystery solved. Thanks to a member on another site the brackets bolt on with the door handle and to the top of the door where the sweeps are mounted.
  15. mopar jack

    window hardware

    I finally got my car back from the body shop after 2.5 years so have been reassembling and can't figure out where these brackets go. I had them bagged and marked with all the window hardware but can't find a picture of their location. I have the body service manual and it doesn't show in the...
Back
Top