Search results

thank you for info

thank you so much.

Hello I'm looking to find where to get a 1969 Road Runner fuseable link. I can find one at the parts store but they do not have the end on it to go into the block on the firewall. I can not seem to find one any where. Thanks Jeff 69

O yes ! Going to have a mechanic look at it . I can do no more damage. Thank you for the help

Do not know. I had a guy rebuild the motor and it never had any power and I only put about 20 miles on it.

I have a 69 383 4 speed Road Runner My oil was black and the motor was running ruff. I took the driver side valve cover off and found on # 7 cyl both push rods were off the rockers. One was bent enough to see and the other was also bent . Do you think I need to change the rockers along with the...

I do not think it can. It was probably from the carb. Do you believe my bearings will need replaced ? I did have some metal showing in the oil

what should be the numbers on the compression check? I will also check the PCV valve

I do not recall that. I was so dumbfounded about the black oil .

Hello , I need some more help .My motor has black oil and smells like gas!!!! I do have shavings in the oil. Don't know how gas could get into the oil. I will need to replace all my bearings, a total rebuild ? Its a 383 engine 4 speed.I have no knocking noises just a lifter ticking. Any help...

I just want to say Thank You all for the info that you gave to me. It does really help... Jeff 69. :party:

Hello, I have a 1969 Road Runner and I spun a crank bearing .I think. My oil is black and I do have shavings in the oil. Any way I'm looking for the best way to take out my engine and transmission at the same time. Any help would be aprecited. Thanks :eek:

Thank you I will try the Chrysler Dealer here in town.

looking for the shims that go into the top holder of the shifter,it is the arm that goes into the car. Looks like it holds about 5 shims? it keeps the shifter arm from being so loose. Thanks Jeff :brickwall:

Thank You for the help..

Can any one tell me what heater hose goes where? I have a 383 motor with no ac. Now my heater hose is connected like this. The one in front is going to the firewall to the right closeto the motor. the one in right in back of the water pump is going to the left side. Is this right ? Thanks...

I have a set of seat belts that I do not know what they fit. I have these numbers on the belt. 9007 3508273 and 9006 3508272, Can any one tell me what I have? The are black. Thanks Jeff :loco:

I took the thermostat out and the water flows very good, and no over heating.This will be the 3rd thermostat I have put in in this car. I will get the bigger thermostat this so I have no more problems. I just want to say THANK YOU ALL for the help. :grouphug: Jeff

The over heating, The fan shroud is on the car,and is stock,the rad cap was off and no water was moving,and I saw no bubles. After just a few min ( 3 or 4 )The water comes out of the rad. Also the water pump does not make any noise, So I just though it might not be that. I did not look at the...

I have a 1969 Road Runner witha 383 motor.The motor seems to overheats seconds after the car is started. well maybe 5 min after starting. I replaced the rad cap and the thermostat (180 ).The water in the rad seems not to be moving. The water pump does not make any noise or does not not leek any...