• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
front view of my roadrunner.jpg
front view of my roadrunner.jpg

Project Roadrunner

1970 project Roadrunner
Overview Gallery

General Description

IMG_67691.jpg I am putting my roadrunner in the body shop next week for 2 new quarters and trunk pan and driver pan. I now need an engine and transmission. also 2 bucket seats.

Comments

IRON MAN
So I need a heater box and a hood safety catch and arm rests for the front doors anybody know where I can get these. Also what is needed to swap out a manual steering for power steering ?
 
IRON MAN
IRON MAN said:
So I need a heater box and a hood safety catch and arm rests for the front doors anybody know where I can get these. Also what is needed to swap out a manual steering for power steering ?
Click to expand...
Well now the metal work is starting so here is hoping
 
Russ69Runner
Your on your way their guy. Are you going to put a hole new wheel tub on the outer. Mine was rusted out at the wheel well area be hind the quarter. I cut the new one at the seam line and married it to the old one after cutting it in the same place it look' s pretty good where the roof rail came down was a little rough on the driver's side but got it welded up. Looks good Iron Man. Keep us up to date with the progress. Lot of guy's follow our lead. If it was not for pictures then I would have been lost on how it would look taken apart and put back together. Russ.:thumbsup:
 
Russ69Runner
IRON MAN said:
I need all interior panels and front seat anybody selling any?
Click to expand...
Door panels and most trim I am getting from classic industries. My car did not have any interior trim at all. Are you going with bench seat or bucket's scatt seat's have come down in price so take a look. Latter guy. have fun.
 
IRON MAN
I had to get my Roadrunner back and the new metal is only screwed on not welded. So a friend and I are going to complete it. But it will probably be done sooner then if I left it to the body guy who was working on it.
 
Russ69Runner
Russ69Runner said:
Your on your way their guy. Are you going to put a hole new wheel tub on the outer. Mine was rusted out at the wheel well area be hind the quarter. I cut the new one at the seam line and married it to the old one after cutting it in the same place it look' s pretty good where the roof rail came down was a little rough on the driver's side but got it welded up. Looks good Iron Man. Keep us up to date with the progress. Lot of guy's follow our lead. If it was not for pictures then I would have been lost on how it would look taken apart and put back together. Russ.:thumbsup:
Click to expand...
So when you have the time give us and up date on the car and some pic's.
 
IRON MAN
I fired the body shop guy and now my friend and I are putting the Roadrunner back together
 
IRON MAN
the rear panel where the back window needs also to come out so that will be the last piece of metal that needs to be cut off>
 
IRON MAN
Well I need an rally under dash wire harness with oil gauge. And I am selling a as of last year a new never used B body under dash wire harness with oil light since I cannot use it.
 
You must log in or register to reply here.

Item information

Category
RoadRunners
Added by
IRON MAN
Views
1,742
Watchers
2
Comments
47
Last update

More in RoadRunners

Share this item

Back
Top