A833 shifter shaft seal

[Rob]

Hello my people, I could use some help....Please. I recently purchased a 1969 RR with a 4 speed. One of the shifter shaft seals is leaking and I have tried to look up the part number so that I can order it and repair. Does anyone possibly have the part number ? Thank you in advance.

 

[Vaanth]

Hello my people, I could use some help....Please. I recently purchased a 1969 RR with a 4 speed. One of the shifter shaft seals is leaking and I have tried to look up the part number so that I can order it and repair. Does anyone possibly have the part number ? Thank you in advance.

The shift shaft seal is an O-ring. Three are used on the A-833 4-speed manual transmission. The original Chrysler part number is 1536267.

Specifications for the seal are as follows:

• Inside Diameter: 0.437 inch
• Outside Diameter: 0.625 inch
• Thickness: 0.093 inch

Some aftermarket part numbers include the following:

Fel-Pro 409
Victor Reinz 72111
McCord 71-0009
National (Federal Mogul) 622709

NOTE: The foregoing numbers are often packed in multiples, but might be sold as a multiple or as singles.

Brewer's Performance offers them in kits, but might sell them separately.

 

[Rob]

Thank you for the information and your support
Happy Motoring

 

[69hemibeep]

One of the front two or the rear one? In case you didn't already know the rear O-ring or reverse the transmission has to come all apart. The front two are in the side cover.