Another dash light problem

Damcanadian

New Member
Joined
Oct 9, 2015
Messages
3
Reaction score
0
Location
Brandon MS
I have no dash lights at all. My turn signals used to work. I pulled out the cluster to check the other lights some of the sockets were broke so I replaced all the sockets and bulbs. Now I have no dash lights at all. I replaced the thumb wheel dimmer switch and replaced all the fuses. My dome light, headlights hi/low, and taillights all work. I checked power at the fuse block in the glove box and I have no power to the 3a fuse, I also checked the power at the main plug behind the cluster and only one spot is getting power. Where should I move to next?
 
do you have the big round plug on all the way, make sure you didn't break any of the contacts off when you plugged it back in.
 
Did you lose a ground or have a bad ground connection now?
 
Where would the cluster be grounded at? I pulled the plug off and it appears that all the connections are still good.
 
Check the ground wire ring to the steering column on the bottom.
Also check the instrument feed fuse in the fuse box. (see diagram)
Capture.JPG

Hope this helps

Capture.JPG
 
Back
Top