Rocket
Well-Known Member
- Joined
- Jul 1, 2010
- Messages
- 288
- Reaction score
- 6
I converted from a 727 to an A833. I wired everything up and when I turn the key nothing (well the very first time I turned it it went for a split second). It turns over when I take a screwdriver to the starter relay. It could be my key switch I guess. I have no clue if I have a neutral safety so I tried grounding the negative side on the starter relay to the frame...nothing. So here are my questions:
- I have a 3 connection relay should I get the four…and ground out the ground connection?
- I accidentally (ha) pushed the female connection for the tach onto the connection the yellow from the other harness goes into with the key off - did I burn up my ignition box?
- Is there a neutral safety with somewhere? I don't see anything on the clutch.