Fuel Gauge

V269

V269

Well-Known Member
Joined
Jul 7, 2009
Messages
1,156
Reaction score
2
Location
Ontario, Canada
Hey guy's need to pick your brain a little. I put a new gas tank and a new 3/8 sending unit in my runner and now the gas gauge does not read properly. It will come up to the empty mark but not any further. Yes there is plenty of gas in the tank and it is grounded as well. I did not change anything else and it worked fine with the old set up. Any thought's ? Let me know. Thank's, Ken. PS, just joined the form, I'm a newbie eh !! :banana:
 
Hi Ken...............I see you found the spot..........These guys will want pictures of your car.

Wayne
 
Hi Ken, welcome aboard!!!

I think that you sometimes have to manually adjust (as in "bend") the float arm to get them to read accurately...trial and error...you guys jump in here and correct me if I'm wrong...

Post some pics...lest ye be drawn and quartered by the Dark Overlord of the Picture Realm (um, that would be our buddy Basketcase...)... :D

:jester:
ACME
 
Or you got a bad gauge. I test them with an ohm meter before they go in. And welcome aboard :party: :party: :party:
 
First, welcome to the birds' nest Ken. And join the club with the gauge reading being off. That seems to be a common problem. Gary, there is only one wire to the sending unit in the tank so I don't think that could be it as long as the wires to the gague itself were changed. And Ray I tried doing the same thing by bending the float rod . I guess I have to do it again 'cause it still ain't right. You say Ken that it only goes to the empty line? That would make me think you got it in upside down. But IIRC, there is a slot in the sending unit so the there is only one way to put it in. That might be something to look at. I'm sure there will be more ideas to follow. And CWR is correct, we do like pictures. Do come back often and join the fun. We have a lot of that here.
 
Ken King said:
Hey guy's need to pick your brain a little. I put a new gas tank and a new 3/8 sending unit in my runner and now the gas gauge does not read properly. It will come up to the empty mark but not any further. Yes there is plenty of gas in the tank and it is grounded as well. I did not change anything else and it worked fine with the old set up. Any thought's ? Let me know. Thank's, Ken. PS, just joined the form, I'm a newbie eh !! :banana:
Click to expand...
The new ones are junk , if your old one read correctly and worked put it back in . They dont make the news ones correct at all . Or try adjusting the float but I have had no luck with the new ones at all even trying to ajust them they only go to 3/4 full and fall off fast to half . Then at empty you still have 6-8 gallons in the tank .

Oh and welcome and we must see pictures of the car and know the color :jester:
 
The new one I had went bad in storage :loco: I got a new one from Hoover auto parts that is of better quality with a brass float and it bench tested perfect. Coarse I havent filled the tank yet :D
 
69hemibeep said:
The new one I had went bad in storage :loco: I got a new one from Hoover auto parts that is of better quality with a brass float and it bench tested perfect. Coarse I havent filled the tank yet :D
Click to expand...
you must let us know if it goes above 3/4 full ? if you ever finish :jester:
 
moparstuart said:
69hemibeep said:
The new one I had went bad in storage :loco: I got a new one from Hoover auto parts that is of better quality with a brass float and it bench tested perfect. Coarse I havent filled the tank yet :D
Click to expand...
you must let us know if it goes above 3/4 full ? if you ever finish :jester:
Click to expand...
Go back to the joke section where you belong :lmao: :lmao: :lmao: :devil:
 
69hemibeep said:
moparstuart said:
69hemibeep said:
The new one I had went bad in storage :loco: I got a new one from Hoover auto parts that is of better quality with a brass float and it bench tested perfect. Coarse I havent filled the tank yet :D
Click to expand...
you must let us know if it goes above 3/4 full ? if you ever finish :jester:
Click to expand...
Go back to the joke section where you belong :lmao: :lmao: :lmao: :devil:
Click to expand...


yes sir I was taught to respect my elders :wave: :wave:
 
you must let us know if it goes above 3/4 full ? if you ever finish :jester:[/quote]
Go back to the joke section where you belong :lmao: :lmao: :lmao: :devil:[/quote]


yes sir I was taught to respect my elders :wave: :wave:[/quote]
Ouch that left a mark :lol:
 
moparstuart said:
69hemibeep said:
The new one I had went bad in storage :loco: I got a new one from Hoover auto parts that is of better quality with a brass float and it bench tested perfect. Coarse I havent filled the tank yet :D
Click to expand...
you must let us know if it goes above 3/4 full ? if you ever finish :jester:
Click to expand...
I would ask, finish what? :jester:
 
Post some pics...lest ye be drawn and quartered by the Dark Overlord of the Picture Realm (um, that would be our buddy Basketcase...)... :D

:jester:
ACME[/quote]


I see someone has been playing Dungeonmasters again..... :toetap: :toetap: :toetap: (pat pend)

welcome to the site Ken :cheers:
 
You must log in or register to reply here.
Back
Top