Rear seat medallion.

[the longhair]

Does anyone have a good way to get these apart without breaking anything?

 

[69hemibeep]

Its been so long ago I don't remember how I did it. I do know I had to tap the teeth back down a bit.

 

[droptop]

I use an ice pick to get into the slot and bend the tabs slightly to allow the head of the pin to come through. Usually have to bend two tabs and they will come apart. And then, as stated above, lightly tap the tabs back down. I have broken a few over the years, but not to many.

 

[RonLiv]

OK, there's some talk on another site about these seat medallions, a guy is selling a couple sets of them. Guys are posting pictures of their cars with the medallions on the front bench seats, two on each side of the bench. I have buckets & no medallions, assume that is correct? These same pictures show the identical medallions on the rear seat as on the front, again two on each side of the bench. On my rear seat I have a single medallion in the middle identical to the one "the longhair" posted above. I've always thought this was correct. So, now I'm confused.

 

[69hemibeep]

OK, there's some talk on another site about these seat medallions, a guy is selling a couple sets of them. Guys are posting pictures of their cars with the medallions on the front bench seats, two on each side of the bench. I have buckets & no medallions, assume that is correct? These same pictures show the identical medallions on the rear seat as on the front, again two on each side of the bench. On my rear seat I have a single medallion in the middle identical to the one "the longhair" posted above. I've always thought this was correct. So, now I'm confused.

View attachment 26630

Buckets dont get those just the big one in the center of the back seat

 

[RonLiv]

Buckets dont get those just the big one in the center of the back seat

OK, I'm good then. Thanks man.