I found someone to rebuild my engine. If I go with Crower (company he works with here in Southern CA) and we go with a hydraulic roller cam, does that mean I have to use the roller lifters as well or recommended. Is the roller cam and lifters just a remove the old flat tappet and install the new roller cam and lifters or is there more to it on a 383.
We have to tear the engine down to change the bearings flush the engine and see if there is any other damage to the engine so I was thinking roller cam and lifters this time.
Hopefully some gear heads can help me out because I would like to know this engine is going together correctly.
Thanks,
Barry
We have to tear the engine down to change the bearings flush the engine and see if there is any other damage to the engine so I was thinking roller cam and lifters this time.
Hopefully some gear heads can help me out because I would like to know this engine is going together correctly.
Thanks,
Barry