speedo pinion

BBillyC

BBillyC

Well-Known Member
Joined
Mar 2, 2009
Messages
460
Reaction score
3
Location
Winnipeg, Canada
With the 4.10 gears and the 29" diameter tires I am going with a 38 tooth speedo pinion. I've never put one in before. Is there anything else I need to replace along with it. thanks B
 
Not that I know of. Some one else can offer more help though im sure. I just picked up a 36 tooth myself for my 3.91's.
 
Based on the tooth count, the gear is indexed by rotating the cable mounting flange to the appropriate marked position on the trans tailshaft housing. Consult page 21-5 in the SM for details. No, you shouldn't need anything else.
 
Thanks Guys. Still waiting on the Moser axles and won't cut anything until I have all of the parts.
 
I don't remember if your car is a 4-speed or an auto. But if it is an auto make sure you have a pan under the speedo housing when you pull it out to catch the fluid that will drain out. DAMHIK :lol:
 
Roadcuda said:
I don't remember if your car is a 4-speed or an auto. But if it is an auto make sure you have a pan under the speedo housing when you pull it out to catch the fluid that will drain out. DAMHIK :lol:
Click to expand...

And jack the back up higher then the front to keep the fluid in the trans.
 
You must log in or register to reply here.
Back
Top