Recent content by dstryr

I love F8, especially on a 70 so recommending something else isn't easy. But I do like C7 and K3. Nice Challenger, Big John!

Here are a few of my T7 RR, driver side is original paint, pass. side was repainted in 2007. Can't tell you why the colors appear so different, angle of the sun I suppose, the driver side pic was spring of '07, pass side shot 09-21-2008. The original pics are approx 1.67mb. Let me know if...

Got word from Carlisle, $90 includes shipping to the continental US. Banner is $80, shipping is a flat $10. Canada or AK, HI, etc. will cost more to ship, but charged at Carlisle's cost. Let me know!

Mac, waiting to hear a firm price; I've committed to 10 and have at least 7 spoken for and can always up the quantity. :thumbsup: George, that's the stroker motor I've been working on for about 4 years...bought the block in Feb '06 and started collecting parts. 440Source heads and rotating...

Hey, guys Thought I'd post this over here and see if there is any interest in reprints of the 2009 Carlisle banners we had printed for the A12 reunion. Tried to get 10-15 done from the Carlisle folks but ended up with only a few so am working with Ed B. @ Carlisle to get another run done for...

Great post, thanks!! This must be your bird: Thanks for your service. :worship:

Nice! :thumbsup:

You can have all the wind, too. I get enough here as it is. :lmao: :pot: :D

I have free snow for anyone who wants some. Just stop by and take some from my front yard! :jester:

Nice pics! Started out -16*F here today. Short sleeves weather for us northerners. AZ guys wouldn't be caught dead outside. :jester: :jester:

Take it easy off the line. All that oil on the intersections with a fresh rain will make the tail end of that hemi car want to come around and say hi! :drive: :jester:

Those are nice. :yesnod: I could use a set to help keep my feet from going through the driver's side floorboard. :eek: :D

http://www.corvetteactioncenter.com/tech/oil/oil_camwear2.html Lifters were $175, comp cams #2901-16. The motor has at least a couple of hours of break-in and dyno run time and about half of the valves needed adjusting by the end of the runs. Check out the article above, good reading on the...

We used the 440Source springs& dampeners for the break-in with Rotella 20W-50 and plenty of comp cams break-in additive. EDM lifters were also chosen to provide more oil to the cam lobes. Will keep an eye on the lash until I get a feel for how well it stays in spec. :thumbsup:

We didn't get the outboards solved but a piece of electrical tape over the top edge of the throat and down over the bleed holes cured the problem temporarily. Mike B @ a12mopar.com suggested the pods may be leaking where they join to the carb body so I will start there. I didn't expect this...