• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Jeff 69

  1. J

    383 bent push rod

    thank you for info
  2. J

    fuseable link

    thank you so much.
  3. J

    fuseable link

    Hello I'm looking to find where to get a 1969 Road Runner fuseable link. I can find one at the parts store but they do not have the end on it to go into the block on the firewall. I can not seem to find one any where. Thanks Jeff 69
  4. J

    383 bent push rod

    O yes ! Going to have a mechanic look at it . I can do no more damage. Thank you for the help
  5. J

    383 bent push rod

    Do not know. I had a guy rebuild the motor and it never had any power and I only put about 20 miles on it.
  6. J

    383 bent push rod

    I have a 69 383 4 speed Road Runner My oil was black and the motor was running ruff. I took the driver side valve cover off and found on # 7 cyl both push rods were off the rockers. One was bent enough to see and the other was also bent . Do you think I need to change the rockers along with the...
  7. J

    black motor oil

    I do not think it can. It was probably from the carb. Do you believe my bearings will need replaced ? I did have some metal showing in the oil
  8. J

    black motor oil

    what should be the numbers on the compression check? I will also check the PCV valve
  9. J

    black motor oil

    I do not recall that. I was so dumbfounded about the black oil .
  10. J

    black motor oil

    Hello , I need some more help .My motor has black oil and smells like gas!!!! I do have shavings in the oil. Don't know how gas could get into the oil. I will need to replace all my bearings, a total rebuild ? Its a 383 engine 4 speed.I have no knocking noises just a lifter ticking. Any help...
  11. J

    Engine Removal

    I just want to say Thank You all for the info that you gave to me. It does really help... Jeff 69. :party:
  12. J

    Engine Removal

    Hello, I have a 1969 Road Runner and I spun a crank bearing .I think. My oil is black and I do have shavings in the oil. Any way I'm looking for the best way to take out my engine and transmission at the same time. Any help would be aprecited. Thanks :eek:
  13. J

    Hurst shifter shims

    Thank you I will try the Chrysler Dealer here in town.
  14. J

    Hurst shifter shims

    looking for the shims that go into the top holder of the shifter,it is the arm that goes into the car. Looks like it holds about 5 shims? it keeps the shifter arm from being so loose. Thanks Jeff :brickwall:
  15. J

    Heater Hose

    Thank You for the help..
Back
Top