Search results

Put a new wire in the bulkhead and changed the terminals on both sides. Everything working good now. Thanks everyone for your input.

Will try that when I get time. Thanks

That may be what I have to do. Do you know if replacement parts are available? I think the brass roller is worn down. Was this type operation used in any other steering wheel?

The spring is under it and it does have some bounce but does not enough that the ball will contact the plate. I can ground the ball to the side of the steering column with a jumper wire and get the horn to beep.

My steering wheel is not the original for this car. I believe it may be a rally steering wheel. My problems that the brass wheel with the black wire attached that grounds the horn to the steering wheel does not make contact. There is just a fraction of an inch space between the plate and the...

I have all the schematics. Even ordered a larger print so it would be easier to read. And I understand the resistor. But I don't understand why the blue wire coming off the wiper switch is hot at all times, key on or key off makes no difference. This wire runs to the bulkhead (H) and out to...

Working on 69 Roadrunner wiper motor. Everything is working, but the blue wire coming from the switch going to the bulkhead has been hot at some time. When I check, I am getting power to this wire at all times when the key switch is on- wiper switch off, switch on low or switch on high, always...

Got this one working. Thanks for your help.

Someone had painted this one black. I got the ohm meter and the manual and started reading on how to check everything. As it turns out my motor is good, just wasn't grounded. So wiper are working fine now. Thanks for your help.

Have been looking for a replacement 2 speed wiper motor for the 69 Roadrunner. Can anyone tell me if this is a resistor on the original motor, and if I have to remove mine and put it on a new motor. I can't find one with this part already on it. I have included a pic to show what I'm...

Thanks, I finally got mine to working. All's good there, now onto the next problem. LOL

Sorry, I should have been clearer, I ordered a new headlight switch. I found it on E-bay for $60. Seller had 100% positive rating. And I do have a complete service manual. And I have ordered a color codes diagram in larger print (haven't gotten yet) so that It will be a little easier to read...

Sorry, I left out that I am working on A 69 Roadrunner.

Hey need some help with my wiring. I am working on the instrument panel wiring, I can't get the dimmer switch to work. I have headlights and taillights but no power to the instrument dimmer switch. Which wire should be hot coming into the dimmer switch plug? I read somewhere that there are 2...