A-833 4-speed........

when yo uget that bird all together, the whole picture story should be saved in the reference section!
 
And yet another BFH, Torch and Channel Lock problem........ :brickwall: Head of bolts stripped so there is no way to get them out with a wrench.........So, I drilled the head off, pulled the bracket off and then the screws came right out..........
 
Hoosier Bird said:
And yet another BFH, Torch and Channel Lock problem........ :brickwall: Head of bolts stripped so there is no way to get them out with a wrench.........So, I drilled the head off, pulled the bracket off and then the screws came right out..........
Click to expand...


Based on my observations when I had the tranny out of Bambi to replace the flywheel, I will be forced to follow a similar approach...

Tranny looks good, Gary!

:jester:
 
ACME A12 said:
[quote="Hoosier Bird":137bo4gx]And yet another BFH, Torch and Channel Lock problem........ :brickwall: Head of bolts stripped so there is no way to get them out with a wrench.........So, I drilled the head off, pulled the bracket off and then the screws came right out..........
Click to expand...


Based on my observations when I had the tranny out of Bambi to replace the flywheel, I will be forced to follow a similar approach...

Tranny looks good, Gary!

:jester:[/quote:137bo4gx]
Thanks, believe it or not I spent about 6 hours on it not counting the bearing retainer......
 
I like the unpainted bolts, like on Bob's. I think he put a new zink coating on them. Just makes it look more detailed........... :thumbsup:
 
Hoosier Bird said:
And yet another BFH, Torch and Channel Lock problem........ :brickwall: Head of bolts stripped so there is no way to get them out with a wrench.........So, I drilled the head off, pulled the bracket off and then the screws came right out..........
Click to expand...

been there done that....... :brickwall: friggin morons......
looks great Gary :thumbsup:
 
Here's what I did to fix it. Trust me, just take it and have it done. It took for ever to get everything lined up, turned and ground........... :brickwall:
 
Gary that does look good, are you saying you didn't have everything to chuck it up in the lathe :toetap:
 
Hoosier Bird said:
Ok, i have 1 more tool to add to the list..........can anyone tell me what that would be....... :brickwall:[/quot



brother you did some magic on that wheel :thumbsup:
Click to expand...
 
Even though you don't have the right tool for that job, which looks great, it must be nice to have most of the tools to do what you've done so far. That's got to be saving some money by not having to send these parts out for the work.
 
You must log in or register to reply here.
Back
Top