Emblem tape

[Russ69Runner]

Has any one put their badges on with a two sided tape instead of using the speed nuts and drilling holes. If so do you remember what you used. Don't want to drill holes in new metal.

 

[dmartin]

Hey Russ I drilled mine and used the black silicone from parts house

 

[droptop]

3M double sided tape.

 

[Russ69Runner]

3M double sided tape.

Hello Droptop thank you for the info. Did you use the foam double sided tape. A friend of mine is redoing a cutlass and got some 3M tape but it was clear and not very thick. Also not to wide. I told him he got the wrong tape. Well going to order some today. Have a good one.

 

[Russ69Runner]

Yes dmartin. Thank you also just did not want to drill holes if I could keep from it. Thanks again.

Hey Russ I drilled mine and used the black silicone from parts house

 

[droptop]

Hello Droptop thank you for the info. Did you use the foam double sided tape. A friend of mine is redoing a cutlass and got some 3M tape but it was clear and not very thick. Also not to wide. I told him he got the wrong tape. Well going to order some today. Have a good one.

Yes, foam double sided tape. I used it to install the pot metal rallye moldings on my Challenger. Been on there almost 2 years and no issues.

 

[Russ69Runner]

That sounds grate. You all know what drilled holes in fresh paint and painted metal will do. Appreciate all the help. Russ. Are we done yet?

 

[Ranger]

When the Road Runner script on my deck lid was loose as well as the Pentastar emblem on the RF fender, I used the 3M foam backed tape. Worked like a charm AND sealed the holes.