Search results

I have the new Cal tracks on with new QA1 shocks and the car went straight and I finally got the carbs tuned good enough for now.The low band was real loose and my shifter was not set correctly but I did make 2 runs while burning the trans fluid so here it is.Sorry I have been away...

I work on a Top Dragster crew[The Lake Erie Monster] and I am trying to put together an individual crew shirt design,This on is mine and the design is off the side of the car.

I am trying to put togather a draw thru turbo carb for my car and I am getting slowed down by the carbon seal needed in the draw thru to not smoke the turbo[twin gt4088 1200hp]Here is a drawing I am using to measure and figure thing out visualy.

I was wondering how many of you have used a chassis dyno,You likes,dislikes on your experience.I have been one 1 before but they did not want be to rejet my carbs so I used the pulls to check other information.I hope to get to a local dyno if I can't get to the track with the unstable weather.

https://www.youtube.com/watch?v=8n_mAHPaAJ4&feature=c4-overview&list=UUkOkj7_1vGZbU452Jp8U4uw I was on a crew for a x275 car but got lots of video,Enjoy other vids from the wkend on my YT page also.

My front planets decided they had enough. These are only the 3 pinion from A&A though and I went with the 5 planet gear this time and an upgrade in RMVB to a low band apply.

https://www.youtube.com/watch?v=F-avJigzBGs&feature=c4-overview&list=UUkOkj7_1vGZbU452Jp8U4uw Enjoy!

http://s1180.photobucket.com/user/metalstorm1/slideshow/NHRANORWALK/NMCANORWALK2013 Not much of a crowd but some nice cars.

https://www.youtube.com/watch?v=VOsCxNuyr9I&feature=c4-overview&list=UUkOkj7_1vGZbU452Jp8U4uw She ran a 6.50 107.65 1.47 60' spinning and peddeling in the 1/8 to make passes getting my license.I hope to get to another track for more traction soon.Enjoy!

The short story is I need to know where the wire is located in the connector on the bulkhead on my 1969 Sport Satellite.Thanks for your help![purple wire]

From today and I will be there all wkend so I will have more.This is only top sportsman and some top dragster and I will have the pro classes over the wkend.enjoy! https://www.youtube.com/watch?v=_Vn5ceduRR8

I got the 727 version and it hit the floorboard/firewall so I got the short TH350 spare short tube to plug the main tube into so the only draw back I was told is it will spill fluid if disconnected and I am fine with that having to drain some before removal.The short plug is a 1208142.I will let...

I made this from a welding tip and drilled it to .090 for my edelbrock victor heads but it can be used in a factory iron head.

https://www.youtube.com/watch?v=UgjZu7x8HaQ The headers smoked from the header wrap and it took a couple times for it to go away but she starts up good for the most part.I have to check the timing,valve lash on the new victor heads,re torque them.

I was able to get some std port victor heads so I am making some 2.250 headers fender exit. :loco: head flow after porting

http://www.youtube.com/watch?v=NM0557i8ehI&feature=plcp I went to the race at norwalk with a racer Chris Streeter[pro fuel] and this is some of the runs.I hope you ejoy the video.

http://www.youtube.com/watch?v=c6POMQLjbpM I am making some progress at getting things running after having some delays like having to redo the rear axle housing end,perches,gears and oh ya i poked a hole in the trans cooler.DUUHHH!

what do you think of your cars ride above 35 or 65+mph? what kind of suspension parts?[torsion/sway bars,shocks,tire/pressure.]

i made a kit for a hydraulic hand brake that has an extra caliper on the rear disc.this is a 1 off so i am not trying to sell these jusy give ideas and share.

i got my car in 1988 and have tried to respect the body and not cut it up yet still make it useable for my needs.