Search results

Got some more time tis last week and got some good time in and installed the Holley sniper, with in tank pump. Didn’t wire it for timing control yet. But what a difference. Starting is awesome, so far it’s very good update. Didn’t get to drive it much because of the weather but performance is...

Back in Nov 2019 Sunday afternoon some lady ran a stop sign and we’ll it wasn’t so good. But it’s back and better than I have ever seen it. And I grew up in it.

Question, what all is involved with changing out the lower steering column bearing? Mine is original and believe that is the cause of the clunk every now and then when turning? And it looks like it’s separated some? Where’s the best place to get it also? Thanks in advance

What do I need to get or use to bond the hood back to the structure underneath the hood skin? The original stuff is still there it’s just released from the hood skin but attached to the hood bracing and all is just the center section above the air cleaner. The car is painted on outside with real...

Anyone recognize this brake master cylinder setup? Having some issues from it and need to replace or repair it. Years ago Dad had someone convert from Drums to disc in the front. Both lines from the master to the proportioning valve are the same size. Front rotors measurements are about 10 1/2...

Here's the background on it. Back in November I got hit in the left front and it got the control arms fender grill and bumper. Got the car back from the shop drove it home. Inspected paint and everything else and ended up going back for paint ok. Pulling into the shop and the turn signal switch...

I have a 22 inch radiator 053 last of part number and want to do a fan shroud to help it in traffic. It looks like I need the 130 part number fan shroud but which brackets do I need to mount it? The set of 4 or the pair of 2? Thanks.

Need a replacement gear that drives the speedometer cable. Black gear and looks to be 32 teeth on it and it has 32 on the gear also. It's for a 4 speed 833 with 3:23 rear gears. Thanks Where to find one?

Need a speedometer gear that drives the cable. My setup is 4 speed 883 with 3:23 rear gears. Black gear and believe it's 32 tooth.

So which bumper Jack is the correct one? I think I have one for the A-body's or can I use the bumper hook on it? Any pictures of what is right are appreciated. Thanks in advance.

Not a MOPAR issue, but helping a good friend with his ride. Anyone familiar with the YH carter carborator for the turbo corvair? Starts and idles, everything is new from engine rebuild. Converted to igniter electronic ignition. Verified timing at factory specks 24 degrees for the turbo motor...

Took the Runner out to one of the local car meets and on the way did a lane change and it got quite eratic! I believe part of it was the road but it should of been much easier to control. Front suspension is stock with sway bar that has Polly end links. Manual steering box, also have 70's a body...

Need some help, where to get a replacement latch for the rear quarter window on the passenger side. Mine broke where it attaches to the window.

Alright guys my passenger side rear quarter window latch broke today. If not the entire latch I just need the part that goes from the window to the latch. Guessing this is the spot they break? Or where can I find a new one? Guess that's what I get for trying to get it cleaned up early for the...

Here's a look.

Got some good news from my dad today. He found the original head rests, sun visors and radio for the RR!! Only thing still missing is the original carb and distributor.

Installed my DP4B intake today. Now the issue I'm having, the stock bracket that mounts to the back of the intake and holds the throttle cable isn't fitting correctly. Mod the stock one or get an aftermarket one or different options?

Anyone done one or thought about installing one in a factory 4 speed car?

Have a chance to get a DP4B intake for my mostly stock 69. 383 with a 4 speed. Using MSD box and distributor. Has a little bigger than stock cam and still running stock cast iron intake.

Questioning have for you all is that I have the disc conversion that my dad had put on it years ago but I don't like the way the flex hose is ran. It is routed from the hard line around the shock and then back to the brake caliper. Isn't there a bracket that mounts to the top of the caliper to...