Stole this Pile! (1969 Road Runner)

[69hemibeep]

My Plasma cutter took a crap on me mid way through the first quarter, plus it has been over 100 degrees here. Might be a couple weeks before I get both quarters on. Once i get it back solid things should start to go faster! ?

Drink lots of water and keep going PUSSY :jester: I took some English lessons from Uncle George. How did I do Looks like your making some good progress :yesnod:

 

[moparstuart]

My Plasma cutter took a crap on me mid way through the first quarter, plus it has been over 100 degrees here. Might be a couple weeks before I get both quarters on. Once i get it back solid things should start to go faster! ?

Drink lots of water and keep going PUSSY :jester: I took some English lessons from Uncle George. How did I do Looks like your making some good progress :yesnod:

yes you did :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao: :lmao:

 

[Roadcuda]

My Plasma cutter took a crap on me mid way through the first quarter, plus it has been over 100 degrees here. Might be a couple weeks before I get both quarters on. Once i get it back solid things should start to go faster! ?

Drink lots of water and keep going PUSSY :jester: I took some English lessons from Uncle George. How did I do Looks like your making some good progress :yesnod:

Not too bad, but I think you need a few F bombs added in there somewhere!! :lmao:

 

[69hemibeep]

My Plasma cutter took a crap on me mid way through the first quarter, plus it has been over 100 degrees here. Might be a couple weeks before I get both quarters on. Once i get it back solid things should start to go faster! ?

Drink lots of water and keep going PUSSY :jester: I took some English lessons from Uncle George. How did I do Looks like your making some good progress :yesnod:

Not too bad, but I think you need a few F bombs added in there somewhere!! :lmao:

Another day or two in training. :jester:

 

[Hoosier Bird]

My Plasma cutter took a crap on me mid way through the first quarter, plus it has been over 100 degrees here. Might be a couple weeks before I get both quarters on. Once i get it back solid things should start to go faster! ?

Drink lots of water and keep going PUSSY :jester: I took some English lessons from Uncle George. How did I do Looks like your making some good progress :yesnod:

:lmao: :lmao: :lmao: :lmao: :lmao: :lmao:

 

[railrider]

My Plasma cutter took a crap on me mid way through the first quarter, plus it has been over 100 degrees here. Might be a couple weeks before I get both quarters on. Once i get it back solid things should start to go faster! ?

Drink lots of water and keep going PUSSY :jester: I took some English lessons from Uncle George. How did I do Looks like your making some good progress :yesnod:

This ain't Arizona! Here in Illinois we have something called Humidity! It can almost take your breath on a hot day! Sometimes it is like breathing water! ?

 

[69hemibeep]

My Plasma cutter took a crap on me mid way through the first quarter, plus it has been over 100 degrees here. Might be a couple weeks before I get both quarters on. Once i get it back solid things should start to go faster! ?

Drink lots of water and keep going PUSSY :jester: I took some English lessons from Uncle George. How did I do Looks like your making some good progress :yesnod:

This ain't Arizona! Here in Illinois we have something called Humidity! It can almost take your breath on a hot day! Sometimes it is like breathing water! ?

Roll that bad boy down here, we can line the quarters up in the morning and watch them melt together by mid afternoon :jester: I'm just bustin your nads, we are getting into our humid period now and I don't like it, hotter but not as humid as you guys. Its 92F 50% humidity but some of that will burn off when the sun comes up :devil: I just finished a 3 mile run out there, I hope my skin stops leaking soon

 

[moparchris]

[
Drink lots of water and keep going PUSSY :jester: I took some English lessons from Uncle George. How did I do Looks like your making some good progress :yesnod:

This ain't Arizona! Here in Illinois we have something called Humidity! It can almost take your breath on a hot day! Sometimes it is like breathing water! ?

Roll that bad boy down here, we can line the quarters up in the morning and watch them melt together by mid afternoon :jester: I'm just bustin your nads, we are getting into our humid period now and I don't like it, hotter but not as humid as you guys. Its 92F 50% humidity but some of that will burn off when the sun comes up :devil: I just finished a 3 mile run out there, I hope my skin stops leaking soon

Who was chasing you? :lock: Its much easier going three miles in a car with the air on.

 

[railrider]

I found my engine for my Road Runner. It is a late 1968 440 that a buddy of mine had built a few years ago, has very few miles since the build. This will save me a lot of dough since he already did all the foot work. I am thinking about some Aluminum heads, and maybe a slightly bigger cam for it though. It won't be blue anymore either, lol

 

[69hemibeep]

Is that the Coronet engine from the other thread?

 

[railrider]

Is that the Coronet engine from the other thread?

Yep, putting a 383 back in it when I go to sell it! ?

 

[railrider]

Finally got my Plasma cutter back together, installed the trunk floor today! More coming soon! :drive:

 

[Basketcase]

lookin good!

 

[69hemibeep]

progress

 

[railrider]

Thanks... Picking up a Dana for it tomorrow, so it will be 68 440, 833 4 Speed with Dana 60. I am hoping to have the floor finished, and the passenger quarter on by the end of the week end. If I don't pussy out because of the heat anyway! lol :devil:

 

[69hemibeep]

Thanks... Picking up a Dana for it tomorrow, so it will be 68 440, 833 4 Speed with Dana 60. I am hoping to have the floor finished, and the passenger quarter on by the end of the week end. If I don't pussy out because of the heat anyway! lol :devil:

:lmao: You can do it :lmao:

 

[Basketcase]

hey while you've got the welder fired up, I've got a couple 1/4 skins that need hung..... course, if all goes well Friday, that might just get put on hold for a while longer. That's OK, she's worth it!

 

[Roadcuda]

Thanks... Picking up a Dana for it tomorrow, so it will be 68 440, 833 4 Speed with Dana 60. I am hoping to have the floor finished, and the passenger quarter on by the end of the week end. If I don't pussy out because of the heat anyway! lol :devil:

:lmao: You can do it :lmao:

That's easy for you to say!!!!! :lmao:

 

[Roadcuda]

hey while you've got the welder fired up, I've got a couple 1/4 skins that need hung..... course, if all goes well Friday, that might just get put on hold for a while longer. That's OK, she's worth it!

So you're going to go for it Dave???

 

[george68hemirr]

looking good