Search results for query: *

I have seen these tools that look like a cordless drill that are used to remove lug nuts from the wheel of a car. I don't know what they are called nor where to look for them. Would these be at Sears or Home Depot type places? My local Sears is closing and are having a sale this weekend so I...

It has been a few years since I have done this and I don't remember how I kept the engine from turning when removing the damper bolt. I am thinking about using my air driven 1/2" impact wrench to do the trick. Does anyone know of a reason why it shouldn't be done that way? Thanks Jack

Changed title to reflect current diagnosis. This not at all what I was expecting. My Runner wouldn't start last weekend and it was clearly fuel as the carbs were bone dry. I kept taking stuff off and really couldn't see a problem. I have an electric pump on the back in-line with the...

I thought I would see if any of you guys with more carb tuning experience had any ideas about this issue. My 526 ci hemi has a stumble when I step on it from light cruise. I have twin Edlebrock 750's (1406) on it. The accelerator pump linkage was set in the middle hole. I set both linkages...

I had intentions all week of taking my hemi road runner to the strip today just to see how it would do despite the 3.23:1 rear gears. However this morning I realized I didn't have a catch can on the car and there was no way they will let you run without one. So I took my 2011 5.0 Mustang GT...

Does anyone know where one can buy vent cables other than Year One? Year One gets $60 for each one which is expensive and they don't seem to last long. I had to replace the passenger side a few years ago and now the drivers side is shot. It's the same problem, the cable housing pulls away...

I want to change my alternator output lead to the battery stud on the starter relay as described in several articles. I will be using 10 ga wire with a 14 ga fusible link. My question is this, do you just leave the wire that is connected to now disconnected or are you adding a second terminal...

I know this comes up every so often. I am thinking about replacing my wheels (which I've never liked) with a set of new Centerlines. I have narrowed it down to three wheels; Retro, Eliminator and Qualifier. Here is a pic of the qualifier http://centerlinewheels.com/view_wheel_ ... p?id=13148...

I finally have a solution to my hard starting Mopar. If my car sits for a couple of days it takes a lot of cranking of the starter and pumping the throttle to get it started. This was true of the 383 as well as the hemi. I am sure it was a fuel issue. I think the gas evaporates from the fuel...

Bob, I am sure you posted a picture of the vapor separator on your engine a few years ago. Would you kindly point me to it or re-post it? I tried a search but you have so many posts I couldn't find it before I ran out of patience. Thanks

I just bought bigger t-bars and a rebuilt steering box from Firm Feel for my Roadrunner. I want to upgrade the suspension so the car handles a little better than a school bus. It looks like I will have to drop the headers to do this and I only want to do that once. Firm Feel recommended their...

I decided to install an electric fuel pump in the roadrunner this week. I had it around for a few months but am just getting around to it. Here's the issue, the pump has 3/8" nipples and the fuel line is 5/16". This kind of irks me because I ordered a 3/8" line when I put in the hemi but sent...

I saw a post of while back where someone had their instrument panel restored and it looked brand new when done. I can't remember where I saw it or which company did the work it. However 69 Roadrunner.net seems to be the most logical place to have seen it since this is where I always go...

I have a question for you guys. I am finally installing my MSD Digital Six Plus ignition box that I bought two years ago. I have hooked several of these up in the past but forgot how I did it. The directions say to bypass the resistor if the coil wire comes through it. I can't tell from the...

I have a very nice pair of hood inserts that say 383. I will post a couple of pics if anyone is interested.

I don't know if anyone on this site would be interested but I have a couple of XV pieces for B bodies that I am not going to use so I'm putting them up for sale. Lower Radiator Support - List Price $89.95 asking $50.00 Inner Fender Braces - List Price $189.95 asking $100.00 My car is pretty...

New, never used MSD Digital Six Plus Ignition Box for sale. I have decided not to use it on my car. The Summit price is $299.95 so you can save $50 on this piece. Price is $250.

Hi guys, it has been a long time since I have been on this board. It is good to see a lot of the old names still here. I have had a lot of non-car related stuff happen this past year and I just sort of drifted away from my cars. I only put about 25 miles on my Roadrunner last year. On that...

I have a ton of parts in my garage that I just have to move. One piece is the 22" radiator that was in my RR with the 383. It is a good radiator and ran very cool, in fact the engine ran too cool with a 160º F thermostat. I want to put it up for sale but I have no idea of it's value, the PN...

Guys, I have to sell the 383 I pulled from my Roadrunner to make some room in the garage. I think it is a fairly new rebuild and is pretty complete except to the parts I cannibalized for my hemi. That is the pulleys, alternator and brackets, bellhousing and flywheel. I would suggest a person...